DETAIL
Product Details
R440
R420
Air Interface Protocol
EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Performance
Includes all possible performance configurations and functionality to deliver peak performance for even the most challenging of applications
Intended for less demanding applications. Does not support the maximum throughput modes available on R420 including Max Throughput FM0, Hybrid, Max Miller and AutoSet Single Reader
Supported Regions or Geographies
• US, Canada, and other regions following US FCC Part 15 regulations
• Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations For complete region list visit:
http://www.impinj.com/Speedway_Revolution_Reader.aspx
Antennas
4 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)
2 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)
Transmit Power
• +10.0 to +30.0 dBm (PoE)
• +10.0 to +32.5 dBm (external universal power supply)
Max Receive Sensitivity
-82 dBm
Min Return Loss
10 dB
Application Interface
EPCglobal Low Level Reader Protocol (LLRP) v1.0.1, Speedway Revolution SDK & EDK
Network Connectivity
10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)
Cellular Connectivity*
• Sierra Wireless AirLink PinPoint XT (CDMA or GSM connectivity with GPS data)
• Sierra Wireless AirLink Raven XT (CDMA or GSM connectivity)
(* Available through Impinj-authorized partners)
Remote control Distance
>30m.
IP Address Configuration
DHCP, Static, or Link Local Addressing (LLA) with Multicast DNS (mDNS)
Time Synchronization
Network Time Protocol (NTP)
Management Interfaces
• Dual image partitions enable smooth transition to new firmware while the reader is still operating
• Scalable upgrade mechanism enables simultaneous scheduled upgrades of multiple readers
• USB Flash Drive
• Impinj Web Management UI
Management Console
• RS-232 using a standard Cisco-style management cable (DB-9 to RJ-45)
• Baud rate: 115200, Data: 8 bit, Parity: none, Stop: 1 bit, Flow control: none
USB
• USB 1.1 Device (Type B) and Host (Type A) ports
• USB Virtual COM Serial Port and USB drive support for embedded applications
GPIO
• 4 inputs, optically isolated 3-30V; 4 outputs, optically isolated, 0-30V, non-isolated 5V,
100mA supply (DB-15)
Power Sources
• Power over Ethernet (PoE) IEEE 802.3af
• +24 VDC @ 800mA via external universal power supply with locking connector—sold separately
Power Consumption
PoE at +30 dBm 3W 11.5W 6W
Power Supply at +30 dBm 3W 13.5W 6W
Power Supply at +32.5* dBm 3W 15W 6W
(*maximum is 31.5 dBm for ETSI region readers)
Environmental Sealing
IEC IP52
Shock and Vibration
Mil-Std-810G Certified
Operating Temperature
-20 ºC to +50 ºC
Humidity
5% to 95%, non-condensing
Dimensions (H x W x D)
7.5 x 6.9 x 1.2 in (19 x 17.5 x 3 cm)
Weight
1.5 lbs (24.5 oz)
RoHS
Compliant to European Union directive 2002/95/EC
