สินค้า Speedway


Product Details



Air Interface Protocol

EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C


Includes all possible performance configurations and functionality to deliver peak performance for even the most challenging of applications 

Intended for less demanding applications. Does not support the maximum throughput modes available on R420 including Max Throughput FM0, Hybrid, Max Miller and AutoSet Single Reader

Supported Regions or Geographies

• US, Canada, and other regions following US FCC Part 15 regulations
 • Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations For complete region list visit:


4 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)

2 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)

Transmit Power

• +10.0 to +30.0 dBm (PoE)

• +10.0 to +32.5 dBm (external universal power supply)

Max Receive Sensitivity

-82 dBm

Min Return Loss

10 dB

Application Interface

EPCglobal Low Level Reader Protocol (LLRP) v1.0.1, Speedway Revolution SDK & EDK

Network Connectivity

10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)

Cellular Connectivity*

• Sierra Wireless AirLink PinPoint XT (CDMA or GSM connectivity with GPS data)

• Sierra Wireless AirLink Raven XT (CDMA or GSM connectivity)

(* Available through Impinj-authorized partners)

Remote control Distance


IP Address Configuration

DHCP, Static, or Link Local Addressing (LLA) with Multicast DNS (mDNS)

Time Synchronization

Network Time Protocol (NTP)

Management Interfaces

• Dual image partitions enable smooth transition to new firmware while the reader is still operating

• Scalable upgrade mechanism enables simultaneous scheduled upgrades of multiple readers

• USB Flash Drive

• Impinj Web Management UI

Management Console

• RS-232 using a standard Cisco-style management cable (DB-9 to RJ-45)

• Baud rate: 115200, Data: 8 bit, Parity: none, Stop: 1 bit, Flow control: none


• USB 1.1 Device (Type B) and Host (Type A) ports

• USB Virtual COM Serial Port and USB drive support for embedded applications


• 4 inputs, optically isolated 3-30V; 4 outputs, optically isolated, 0-30V, non-isolated 5V,
100mA supply (DB-15)

Power Sources

• Power over Ethernet (PoE) IEEE 802.3af
• +24 VDC @ 800mA via external universal power supply with locking connector—sold separately

Power Consumption

PoE at +30 dBm 3W 11.5W 6W
Power Supply at +30 dBm 3W 13.5W 6W
Power Supply at +32.5* dBm 3W 15W 6W
(*maximum is 31.5 dBm for ETSI region readers)

Environmental Sealing


Shock and Vibration

Mil-Std-810G Certified

Operating Temperature

-20 ºC to +50 ºC


5% to 95%, non-condensing

Dimensions (H x W x D)

7.5 x 6.9 x 1.2 in (19 x 17.5 x 3 cm)


1.5 lbs (24.5 oz)


Compliant to European Union directive 2002/95/EC